The 7101 has a radius SAA faceplate for use with double doors and is available in 12v, 24v and monitored and unmonitored versions. Fail secure and fail safe can be reversed on site. The supplied sub cover will suit a 44mm thick door that closes flush with the jamb edge. See the associated parts for extended sub covers.
Measurements
Type: Mortice.
Style: ANSI.
Jaw: None adjustable.
Jaw Dimensions: (H) 36mm x (W) 17mm x (D) 12mm.
Dimensions: (H) 124mm x (W) 42mm x (D) 39mm.
Field Reversible: Fail safe / Fail secure.
Current Consumption: 332mA @ 12V DC, 1480mA @ 12V AC.
Latch Accommodation: 11mm (measurement inc. 3mm air gap).
Sizes
Height:124mm
Width:32mm
Depth:41mm
Jaw height:36mm
Jaw depth:12mm
Jaw width:17mm
Operation
Fail locked/secure: applying current to the strike causes the jaw to pivot back, allowing the latch to clear the strike and the door to be opened from the outside
Fail unlocked/safe: the jaw remains locked while a current is applied to it. When the current is broken, the jaw pivots back, allowing the latch to clear the strike and the door to be opened from the outside
Current can be controlled by keypad, keyswitch or any access control system
Notes
Voltage:12 volt
Power failure mode:Fail secure/Fail safe(Reversible)
Max Holding Force:907kg/2000lbs
Handed:No
Will fit into a aluminium jamb section as shallow as 44.45mm
Electrical actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without operating the latch itself
The 7101 has a radius SAA faceplate for use with double doors and is available in 12v, 24v and monitored and unmonitored versions. Fail secure and fail safe can be reversed on site. The supplied sub cover will suit a 44mm thick door that closes flush with the jamb edge. See the associated parts for extended sub covers.
Measurements
Type: Mortice.
Style: ANSI.
Jaw: None adjustable.
Jaw Dimensions: (H) 36mm x (W) 17mm x (D) 12mm.
Dimensions: (H) 124mm x (W) 42mm x (D) 39mm.
Field Reversible: Fail safe / Fail secure.
Current Consumption: 332mA @ 12V DC, 1480mA @ 12V AC.
Latch Accommodation: 11mm (measurement inc. 3mm air gap).
Fail locked/secure: applying current to the strike causes the jaw to pivot back, allowing the latch to clear the strike and the door to be opened from the outside
Fail unlocked/safe: the jaw remains locked while a current is applied to it. When the current is broken, the jaw pivots back, allowing the latch to clear the strike and the door to be opened from the outside
Current can be controlled by keypad, keyswitch or any access control system
Height:124mm
Width:32mm
Depth:41mm
Jaw height:36mm
Jaw depth:12mm
Jaw width:17mm
Voltage:12 volt
Power failure mode:Fail secure/Fail safe(Reversible)
Max Holding Force:907kg/2000lbs
Handed:No
Will fit into a aluminium jamb section as shallow as 44.45mm
Electrical actuation unlocks the strike jaw, releasing the latchbolt so the door can be opened without operating the latch itself
Description
The 7101 has a radius SAA faceplate for use with double doors and is available in 12v, 24v and monitored and unmonitored versions. Fail secure and fail safe can be reversed on site. The supplied sub cover will suit a 44mm thick door that closes flush with the jamb edge. See the associated parts for extended sub covers.
Measurements
Additional information
Adams Rite