Fab & Fix Balmoral Blank Lever Lever UPVC Multipoint Door Handles – 92mm PZ Sprung 212mm Screw Centres

Product Information

These Fab & Fix dummy handles from the Balmoral range have a sprung 92pz internal lever and a blank external lever designed to operate a slave lock with a half euro cylinder. This handle set is commonly used on French doors where external access is not usually required. With a backplate of 242mm x 32mm they are available in various finishes which all meet the requirements of BS EN 1670:2007 Grade 5 (480 hours) for Corrosion Resistance.

The distance between the fixing screws is 212mm with the bottom screw positioned 18mm below the euro profile cut-out.

They are supplied as a pair complete with fixings consisting of spindle & 2 colour co-ordinated screws.

Sizes

• Sprung
• Length: 242mm
• Width: 32mm
• Centres (PZ): 92mm (Internal handle only)
• Screw Centres: 212mm
• Base of euro to bottom screw: 18mm
• Top screw to spindle: 75mm
• PAS.24
• Supplied with spindle and screws
• Supplied as a pair
• Non-handed

Operation

These Fab & Fix dummy handles from the Balmoral range have a sprung 92pz internal lever and a blank external lever designed to operate a slave lock with a half euro cylinder. This handle set is commonly used on French doors where external access is not usually required. With a backplate of 242mm x 32mm they are available in various finishes which all meet the requirements of BS EN 1670:2007 Grade 5 (480 hours) for Corrosion Resistance.

The distance between the fixing screws is 212mm with the bottom screw positioned 18mm below the euro profile cut-out.

They are supplied as a pair complete with fixings consisting of spindle & 2 colour co-ordinated screws.